According to the construction requirements, the main reinforcement of the reinforcement cage is manually fixed through the corresponding template circular hole of the fixed rotary disk to the corresponding hole of the mobile rotary disk. The rotating plate and the moving rotating plate rotate to wind the rebar around the main bar (the moving plate is rotated while moving backward), and welded at the same time to form a product steel cage.
1). Fast processing speed and high work efficiency
2). The processing quality is stable and reliable. The digital continuous diameter change is adopted, and the full frequency conversion is used for synchronous speed regulation.
3). Compared with manual operation, save material and reduce construction cost
4). Because the main bars are evenly distributed on its circumference, saving hoisting time.
1). Frequently refuel the transmission parts such as chains, gears, and screw rods, the walking parts for push bars, and the nozzle.
2). The conductive copper belt end bolts between the welding transformer and the welding wheel and the conductive wheel should be checked and tightened frequently to prevent loosening and ablation.
3). The dust in the electric control cabinet should be removed frequently, and the screws of each terminal should be checked and tightened frequently. For each fixed-length, non-contact switch, check the tightening frequently to prevent displacement.
4). Welding shall not be carried out with reinforcing bars exceeding the diameter range, surface corrosion and oil contamination.
5). When welding the socket network, pay attention to the speed of the motors of the diameter expansion motor, the rib motor and the welding mechanism to maintain a fixed ratio.
5.Packing & shipping