1. Product description
According to the construction requirements, the main ribs of the steel cage are fixed by manually passing through the corresponding template circular holes of the fixed rotating disc to the corresponding holes of the moving rotating disc, and the ends of the ribs (wound ribs) are first welded to one main rib and then fixed. The rotating disk and the moving rotating disk rotate to wrap the rib around the main rib (the moving disk is rotated while moving sideways), and at the same time, welding is performed to form a product reinforcing cage.
1). The speed is fast and the working condition is 2, and the whole process can be produced. In normal working conditions, 3-6 people can produce 10-20 multi-section steel cages.
2). Mechanized work is not affected by human factors, and long-term work can be unchanged.
3). It is suitable for the design requirements of the number, form, model, size and length of the main rib stirrups. It will not affect the design of the steel cage due to the function of the equipment or can not be produced on the machine.
4). Convenient and convenient combined design makes the handling, installation, production and other independent lifting equipment, adapt to the industrialized large-scale fixed production and the scattered construction of the construction site.
5). The construction of the assembly line is not affected by the various processes, and the main rib stirrups are welded continuously, and the ribs are welded.
6). Thread connection technology can be used to help the steel cage to disintegrate and install.
1). Check that the performance is good before using the equipment, and whether the workbench and the steel cage welding machine are kept level.
2). Before working, prepare each mandrel tool block and adjust the mandrel forming shaft and armrest shaft according to the regulations.
3). Check if the stoppers, turntables, etc. of the mandrel are damaged. If there is any problem, handle it in time.
4). Before processing, the machine can be idling for a few minutes before inserting the bent end of the steel bar into the gap provided by the turntable.
5). The other end of the steel bar needs to be pressed by hand, and the fuselage is fixed, so that the side that blocks the steel bar can be started.
6). When processing steel bars in a steel cage roll welder, it is forbidden to change the diameter, number of roots, speed, etc. of the steel bars.
Q:What’s your delivery time?
A:It depend on your quantity.
Q:What are your payment terms?
A:T/T, L/C, Paypal, Credit card, Western union, Moneygram are all ok.
Q:Who arrange shipping?
A:We will arrange shipping for you if you don’t have special requirement.