Cement pole making machine is used to produce electric poles. In consideration of the contact with cement slurry during centrifugation, it is necessary to do a good job of waterproofing and anti-slurry treatment during the production of the centrifuge. It can be used outdoors as long as it is fixed.
1). Centrifuge structure: drive part, brake part, transmission part, base and support
2). Drive part: motor, pulley, belt
3). Brake part: brake wheel, brake pad
4). Transmission part: main shaft, coupling, bearing
5). Base and support: centrifuge base, anchor bolt, bearing seat
3.Inspection and maintenance safety instructions
1). The equipment must be powered off before maintenance
2). Only when the inspection is completed after the maintenance is completed, the machine can be started and operated.
3). Do not start the centrifuge in a determined unsafe environment
4). If the centrifuge is known to be unsafe, please attach the "dangerous" mark and disconnect the wiring of the circuit. Reconnect it when the situation is normal and notify the operators.
5). Remove the power cord before cleaning or repairing the inside of the centrifuge
4.Packing & delivery