Concrete pole making machine is used to produce electric poles. In consideration of the contact with cement slurry during centrifugation, it is necessary to do a good job of waterproofing and anti-slurry treatment during the production of the centrifuge. It can be used outdoors as long as it is fixed.
2.Principle of concrete pole making machine
As the working principle of the centrifuge is to make the concrete centrifugally formed by the centrifugal force generated by the rotation of the mold with its own center line as the axis, the roundness of the mold running wheel and the straightness of the axis are of great significance for the centrifugal molding of the mold. For the mold running wheel is not round due to the tight seam during the mold clamping process, and the mold is not straight due to the accumulation of residual slurry at the end of the mold, it will cause the mold to jump, which will increase the wear and tear of the centrifuge running wheel and the mold itself. Damage, pay more attention during the production process.
At the same time, the displacement of the running wheel of the centrifuge, especially the displacement of the side running wheel, will affect the service life of the mold running wheel.
3.Structure of concrete pole making machine
1). Centrifuge structure: drive part, brake part, transmission part, base and support
2). Drive part: motor, pulley, belt
3). Brake part: brake wheel, brake pad
4). Transmission part: main shaft, coupling, bearing
5). Base and support: centrifuge base, anchor bolt, bearing seat