Concrete pole welding machine is an extension of ordinary roll welding machine. It uses intelligent system control to process different specifications of round steel wire rods and rebars into rebar components required in the project.
1). Faster work efficiency: The design of the cage bracket is better. When changing the specifications, there is no need to loosen the eight bolts on the bracket frame, only the position of the positioning pin needs to be changed.
2). The bending angle is more accurate: the tight-wound length of the two ends of the skeleton and the distance between the ring bars can be set through the human-machine interface.
3). The design of the winding machine is simple and practical, the speed is adjustable, the wiring is even, the efficiency is high, and the operator's feedback is good.
4). Use DC power supply, low current density, no inductance, improved power factor and other factors to reduce the power of the power supply.
3.Care and maintenance
1). Check if there is any abnormality in the brake system, spring, brake disc, etc. of the welding machine before starting.
2). Make sure that all parts of the bending hoop machine are running normally when starting up.
3). Apply lubricating oil to the parts that need lubricating oil.
4). At the end of use or at the beginning, cleaning is recommended to remove iron oxide scale and debris.
5.Packing & delivery