Roller hanging type concrete pipe machine is kind of machine to produce concrete pipes and pre-stress concrete pipe.
It can make pipes with diameter from 300-2400mm and with length from 2000-4000mm. We can design many kinds of pipe joint, including flush joint(flat mouth type), groove joint, socket and spigot joint(socket and plug mouth type) ect. And all the concrete pipes are widely used in administrate drainage, agricultural field irrigation, rood culvert and deep water well.
Working Principle
This machine uses the Roller to support the concrete pipe mould, and produce the roller force to concrete in the mould. When the roller rotate at a high speed, the concrete in the mould will spread in the inner wall of the pipe mould and form a cement pipe with the centrifugal force, and when the mould with the inner concrete pass on the roller, the concrete between the mould and the roller will be compacted solid to form a pipe.
Features:
1.Wide production range:300-2400mm, length 2-4m.
2.Different pipe end joint, males&female end; Spigot&Socket end;
3.High efficiency, short production time, every pipe needs several minutes.
4.With hard dry casting concrete, high intensity, and better strength;
5.No polluted slurry discharge, environment friendly with low noise.
ITEM | XG 300-600 | XG 600-1200 | XG 800-1500 | XG 1000-1800 | XG 1200-2000 | XG 1500-2400 |
Diameter | 200-600mm | 600-1200mm | 800-1500mm | 1000-1800mm | 1200-2000mm | 1500-2400mm |
Length | 2-4m | 2-4m | 2-4m | 2-3m | 2-3m | 2-2.5m |
Power of Motor | 18.5KW | 37KW | 55KW | 90KW | 110KW | 132KW |
Capacity | 6-8pcs/h | 6-8pcs/h | 6-8pcs/h | 6-8pcs/h | 6-8pcs/h | 6-8pcs/h |
Labor demand without feeding machine | 2-3 | 2-3 | 2-3 | 2-3 | 2-3 | 2-3 |
Labor demand with feeding machine | 2-3 | 2-3 | 2-3 | 2-3 | 2-3 | 2-3 |
Joint | Plain,socket and steel socket, tongue and groove,etc | Plain,socket and steel socket, tongue and groove,etc | Plain,socket and steel socket, tongue and groove,etc | Plain,socket and steel socket, tongue and groove,etc | Plain,socket and steel socket, tongue and groove,etc | Plain,socket and steel socket, tongue and groove,etc |
Advantages:
Average wall thickness ,smooth inner and outer wall ,good impermeability ,high compressive strength ,low cost ,firm and reliable tie-in, convenient construction, high efficiency ,and instant film-releasing maintenance, etc.
Our Service:
1.24 hours technical support by phone,E-mail,what’s app etc.
2.Our engineer will guide installation and training.
3.One year warranty period.